Arduino LED Shield Sample Codes

¬† LED BLINK PROGRAM :- This tutorial is all about LED Blinking program and it’s logic ,To execute this program we need LED’s Microcontroller board Power Supply and proper program downloading S/W along with It’s required accessories .In this program...
Light Follower Tone

Light Follower Tone

Introduction: In this project we will generate tone signal whose sound intensity varies according to the amount of light which falls on Light Dependent Resistor(LDR). If amount of light is more sound is more and light is less sound is also less. Here we are using one...
Simple tone generation

Simple tone generation

Introduction: This is a simple tone generation circuit using Arduino with the help of Buzzer. In this diiferent sound signals are produced inside the project. It uses the built in tone library to generate the desired frequency and the specified On time for the signal....

PC based Device Control

Introduction: In this project PC based Device control takes place. With Arduino platform as mediator we are going to perform this task. Serial communication is used inside this program. Four LEDs get controlled by using this. When we enter one letter in COM port...

PC interfacing with ARDUINO

Introduction: This is a simple PC interface program.When arduino is connected to PC, it creates a COM port that is serial port with a particular number. This number is the same on which is used to download the code. We’ll try to initialize communication with...
Tv Remote Decoder

Tv Remote Decoder

Introduction: In this project we are going to find different codes for different keys of remotes. This is done with the help of Arduino and some components  such as LCD, TSOP 1738 Decoder. each button of remote has different code. By using TSOP and LCD we are going to...